Why Every Rider Needs a Smart Turn Signal Cancel Flasher

Have you ever forgotten to turn off your indicator after taking a turn? It’s a common mistake that can lead to dangerous situations on the road, confusing riders behind you and leading to potential accidents.

The Auto Cut-Off Smart Indicator Flasher solves this safety hazard. Using a built-in microchip, it automatically turns off your indicators after a set time if you forget. Designed specifically for Indian roads, it also acts as a full-featured hazard flasher with several flashing patterns for rain, fog, and night riding.

Key Features & Benefits

• Intelligent Auto Cut-Off: Turn signals automatically shut off after 30–45 seconds if left running, protecting your battery and keeping you safe on the highway.
• Multiple Hazard Patterns: Choose from several distinct blink patterns (including Police strobe, double-blink, slow fade, and hazard flash) for high visibility in fog, heavy rain, or breakdown scenarios.
• Switchless Pattern Selection: No need to drill holes or install cheap external plastic switches. Control everything directly using your existing handlebar turn-signal switch!
• 100% Plug-and-Play: Uses OEM-standard coupler connectors. Connect it in less than 5 minutes without cutting or splicing any factory wires—preserving your bike’s warranty.
• Weatherproof Design: Sealed casing protects the module against heavy rains, dust, and pressure washing.

Technical Specifications

• Operating Voltage: 9V – 16V DC (Compatible with all 12V motorcycle batteries)
• Auto Cut-Off Timer: ~30 Seconds
• Compatible Bulbs: Supports both standard halogen bulbs and aftermarket LED indicators
• Wiring System: OEM-style standard relay coupler plug
• Protection Rating: IP65 Waterproof

Motorcycle Compatibility Guide

This flasher is universally compatible with all mid-range and premium motorcycles in India:

• Royal Enfield: Classic 350/500, Bullet, Himalayan, Meteor, Interceptor 650
• Bajaj: Pulsar (all variants), Dominar 250/400, Avenger
• TVS: Apache RTR 160/180/200, Apache RR310, Raider
• Yamaha: R15, MT-15, FZ, FZ-X
• KTM: Duke 125/200/250/390, RC Series
• Honda: CB350, Hornet, Unicorn, SP125
• Suzuki: Gixxer, Gixxer SF, V-Strom SX

How to Install (Step-by-Step DIY Guide)

1. Locate your Stock Flasher Relay: Remove your bike’s side panel or headlight cowl to locate the stock turn-signal relay.
2. Unplug the Stock Relay: Disconnect the factory coupler from the stock relay.
3. Connect the Smart Flasher: Plug the Auto Cut-Off Smart Flasher coupler directly into the factory connector.
4. Mount Securely: Use the provided zip-tie to secure the waterproof module safely inside the frame, away from direct engine heat.
5. Test Your Signals: Turn on the ignition and test the indicators and hazard patterns!

Frequently Asked Questions (FAQ)

Q: Do I need to cut any wires to install this?

A: No. This is a 100% plug-and-play module. It connects directly to your factory wiring harness coupler, meaning your manufacturer’s warranty remains intact.

Q: How do I change the hazard blink patterns?

A: To change the pattern, simply toggle your indicator switch Left-Right-Left quickly. The module will automatically cycle to the next flashing pattern.

Q: Does it support LED indicators?

A: Yes, it is fully compatible with both stock halogen bulbs and aftermarket LED indicator bulbs without causing “hyper-flashing”.

Q: What happens if the engine is turned off?

A: The flasher has a zero-drain sleep mode when the ignition is switched off, ensuring it never drains your battery while the bike is parked.